[Synce-devel] Airis T620

Soós Péter

2007-07-31 10:11:20 UTC

Hi,

I have a new Windows Mobile 5.0 based GPS/PDA: Airis T620 (see
http://www.airiseurope.com/Tienda/Default.aspx?idG=001&idSG=004 for
details). I'd like to connect itto my IBM/Lenovo ThinkPad T60 running
Debian Etch 4.0 with kernel 2.6.18. I installed all necessary packages
by apt, and followed the instructions on page
http://www.synce.org/index.php/Connecting_your_Windows_Mobile_2003_device_via_USB
to connect my PDA, but I got kernel Oops:

# cat /proc/bus/usb/devices > /tmp/before
# cat /proc/bus/usb/devices > /tmp/after
# diff /tmp/before /tmp/after
96a97,109

T: Bus=03 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 8 Spd=12 MxCh= 0
D: Ver= 2.00 Cls=ef(unk. ) Sub=01 Prot=01 MxPS= 8 #Cfgs= 1
P: Vendor=3340 ProdID=a0a4 Rev= 0.00
S: Manufacturer=AIRIS Corporation
S: Product=AIRIS USB Sync
S: SerialNumber=ce022f18-0c0c-060c-0108-0030bd2d13b0
C:* #Ifs= 2 Cfg#= 1 Atr=c0 MxPwr=500mA
I: If#= 0 Alt= 0 #EPs= 1 Cls=ef(unk. ) Sub=01 Prot=01 Driver=(none)
E: Ad=81(I) Atr=03(Int.) MxPS= 8 Ivl=1ms
I: If#= 1 Alt= 0 #EPs= 2 Cls=0a(data ) Sub=00 Prot=00 Driver=(none)
E: Ad=82(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms
E: Ad=03(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms

# modprobe ipaq vendor=0x3340 product=0xa0a4
# cat /proc/bus/usb/devices > /tmp/before
# cat /proc/bus/usb/devices > /tmp/after
# diff /tmp/before /tmp/after
67a68,80

T: Bus=04 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 3 Spd=12 MxCh= 0
D: Ver= 2.00 Cls=ef(unk. ) Sub=01 Prot=01 MxPS= 8 #Cfgs= 1
P: Vendor=3340 ProdID=a0a4 Rev= 0.00
S: Manufacturer=AIRIS Corporation
S: Product=AIRIS USB Sync
S: SerialNumber=ce022f18-0c0c-060c-0108-0030bd2d13b0
C:* #Ifs= 2 Cfg#= 1 Atr=c0 MxPwr=500mA
I: If#= 0 Alt= 0 #EPs= 1 Cls=ef(unk. ) Sub=01 Prot=01 Driver=ipaq
E: Ad=81(I) Atr=03(Int.) MxPS= 8 Ivl=1ms
I: If#= 1 Alt= 0 #EPs= 2 Cls=0a(data ) Sub=00 Prot=00 Driver=ipaq
E: Ad=82(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms
E: Ad=03(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms

# synce-serial-config ttyUSB0

You can now run synce-serial-start to start a serial connection.

$ dccm
# synce-serial-start

synce-serial-start is now waiting for your device to connect

blackbox kernel: Oops: 0002 [#1]
blackbox kernel: SMP
blackbox kernel: CPU: 0
blackbox kernel: EIP is at ipaq_open+0x1de/0x381 [ipaq]
blackbox kernel: eax: f752a000 ebx: e004f720 ecx: c1a94e00 edx:
00000000
blackbox kernel: esi: f78d1d54 edi: 00000100 ebp: f78d1d40 esp:
df863e60
blackbox kernel: ds: 007b es: 007b ss: 0068
blackbox kernel: Process pppd (pid: 5307, ti=df862000 task=e0660030
task.ti=df862000)
blackbox kernel: Stack: c023502c 00000000 c0235dd6 e0225600 00000007
00000000 c1a94e00 e16e6880
blackbox kernel: 00000064 00000000 c1a94e00 e16e6880 e0671800 c1a94e0c
f8f68fa5 c0234f03
***@blackbox:~# blackbox kernel: c01eac83 f8f6f480 e02256c0 ffffffed
e0671800 e02256c0 0bc00000 00000000
blackbox kernel: Call Trace:
blackbox kernel: Code: ff ba d0 00 00 00 a1 38 42 35 c0 e8 6c 86 20 c7
8b 4c 24 18 89 41 4c 85 c0 0f 84 7c 01 00 00 8b 44 24 18 8b 50 44 89 c1
8b 40 3c <89> 42 30 8b 51 54 8b 41 4c 89 42 30 8b 41 44 c7 40 38 00 10 00
blackbox kernel: EIP: [<f8f50b09>] ipaq_open+0x1de/0x381 [ipaq] SS:ESP
0068:df863e60

Do you have any idea to solve it?

Thanks in advance,
Peter