[Synce-devel] synce problem

[Gergely Fazekas]

Hello,

I was trying to configure synCE but the kernel doesn't recognize my PDA.
I'm using KDE.

Here are the needed informations:

1. 2.6.20 (custom compiled kernel, all neccessary modules compiled)
2. MDA-Vario II
3. Vendor=0bb4 ProdID=0b04

The output from the diff /tmp/before /tmp/after command (I'm using the
HOWTO on the website):

helios dinchamion # diff /tmp/before /tmp/after
34a35,47

T: Bus=02 Lev=01 Prnt=01 Port=05 Cnt=02 Dev#= 3 Spd=12 MxCh= 0
D: Ver= 2.00 Cls=ef(unk. ) Sub=01 Prot=01 MxPS= 8 #Cfgs= 1
P: Vendor=0bb4 ProdID=0b04 Rev= 0.00
S: Manufacturer=HTC
S: Product=Generic RNDIS
S: SerialNumber=00197735-6115-0147-5800-0050bf3f5173
C:* #Ifs= 2 Cfg#= 1 Atr=80 MxPwr=500mA
I: If#= 0 Alt= 0 #EPs= 1 Cls=ef(unk. ) Sub=01 Prot=01 Driver=(none)
E: Ad=81(I) Atr=03(Int.) MxPS= 64 Ivl=1ms
I: If#= 1 Alt= 0 #EPs= 2 Cls=0a(data ) Sub=00 Prot=00 Driver=(none)
E: Ad=82(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms
E: Ad=03(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms

And the output of dmesg | grep usb:

helios dinchamion # dmesg | grep usb
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
usb usb1: configuration #1 chosen from 1 choice
usb usb2: configuration #1 chosen from 1 choice
usb 2-3: new full speed USB device using ohci_hcd and address 2
usb 2-3: configuration #1 chosen from 1 choice
usbcore: registered new interface driver cdc_acm
drivers/usb/class/cdc-acm.c: v0.25:USB Abstract Control Model driver for
USB modems and ISDN adapters
drivers/usb/class/usblp.c: usblp0: USB Bidirectional printer dev 2 if 0
alt 0 proto 2 vid 0x04A9 pid 0x106A
usbcore: registered new interface driver usblp
drivers/usb/class/usblp.c: v0.13: USB Printer Device Class driver
usbcore: registered new interface driver usb-storage
usbcore: registered new interface driver hiddev
usbcore: registered new interface driver usbhid
drivers/usb/input/hid-core.c: v2.6:USB HID core driver
usbcore: registered new interface driver usbserial
drivers/usb/serial/usb-serial.c: USB Serial support registered for generic
usbcore: registered new interface driver usbserial_generic
drivers/usb/serial/usb-serial.c: USB Serial Driver core
drivers/usb/serial/usb-serial.c: USB Serial support registered for
PocketPC PDA
drivers/usb/serial/ipaq.c: USB PocketPC PDA driver v0.5
usbcore: registered new interface driver ipaq
drivers/usb/serial/usb-serial.c: USB Serial support registered for GSM
modem (1-port)
usbcore: registered new interface driver option
drivers/usb/serial/option.c: USB Driver for GSM modems: v0.7.1
usbcore: registered new interface driver emi62 - firmware loader
usbcore: registered new interface driver ldusb
usb usb3: configuration #1 chosen from 1 choice
usbcore: registered new interface driver hci_usb
usbcore: registered new interface driver bcm203x
usbcore: registered new interface driver bpa10x
usbcore: registered new interface driver bfusb
usb 2-6: new full speed USB device using ohci_hcd and address 3
usb 2-6: configuration #1 chosen from 1 choice
usb 2-6: USB disconnect, address 3


According to the forums, my device should be able to connect. Any
pointers or ideas are greately appreciated!

Thanks,
Gergely Fazekas

[David Eriksson]

Post by Gergely Fazekas
Hello,
I was trying to configure synCE but the kernel doesn't recognize my PDA.
I'm using KDE.
1. 2.6.20 (custom compiled kernel, all neccessary modules compiled)
2. MDA-Vario II
3. Vendor=0bb4 ProdID=0b04
The output from the diff /tmp/before /tmp/after command (I'm using the
helios dinchamion # diff /tmp/before /tmp/after
34a35,47

T: Bus=02 Lev=01 Prnt=01 Port=05 Cnt=02 Dev#= 3 Spd=12 MxCh= 0
D: Ver= 2.00 Cls=ef(unk. ) Sub=01 Prot=01 MxPS= 8 #Cfgs= 1
P: Vendor=0bb4 ProdID=0b04 Rev= 0.00
S: Manufacturer=HTC
S: Product=Generic RNDIS
S: SerialNumber=00197735-6115-0147-5800-0050bf3f5173
C:* #Ifs= 2 Cfg#= 1 Atr=80 MxPwr=500mA
I: If#= 0 Alt= 0 #EPs= 1 Cls=ef(unk. ) Sub=01 Prot=01 Driver=(none)
E: Ad=81(I) Atr=03(Int.) MxPS= 64 Ivl=1ms
I: If#= 1 Alt= 0 #EPs= 2 Cls=0a(data ) Sub=00 Prot=00 Driver=(none)
E: Ad=82(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms
E: Ad=03(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms

This is a Windows Mobile 5 device, follow these instructions:

http://www.synce.org/index.php/Windows_Mobile_2005_Support

\David
--