[Synce-devel] Driver=none

[Giovanni Pavolini]

Hi,
I got a Driver=none when tryed to sync my rx3115 to Fedora 6. These are the outputs:



[***@localhost pavolo]# diff /tmp/before /tmp/after
32a33,40

T: Bus=02 Lev=01 Prnt=01 Port=02 Cnt=02 Dev#= 4 Spd=12 MxCh= 0
D: Ver= 1.00 Cls=ff(vend.) Sub=ff Prot=ff MxPS=16 #Cfgs= 1
P: Vendor=03f0 ProdID=1016 Rev= 0.00
C:* #Ifs= 1 Cfg#= 2 Atr=c0 MxPwr=100mA
I:* If#= 0 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none)
E: Ad=81(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms
E: Ad=04(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms

[***@localhost pavolo]# uname -r
2.6.22.5-49.fc6

Device is a HP rx3115

Thanks!,

Giovanni P.





____________________________________________________________________________________
Need a vacation? Get great deals
to amazing places on Yahoo! Travel.
http://travel.yahoo.com/

[David Eriksson]

Post by Giovanni Pavolini
Hi,
32a33,40

T: Bus=02 Lev=01 Prnt=01 Port=02 Cnt=02 Dev#= 4 Spd=12 MxCh= 0
D: Ver= 1.00 Cls=ff(vend.) Sub=ff Prot=ff MxPS=16 #Cfgs= 1
P: Vendor=03f0 ProdID=1016 Rev= 0.00
C:* #Ifs= 1 Cfg#= 2 Atr=c0 MxPwr=100mA
I:* If#= 0 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none)
E: Ad=81(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms
E: Ad=04(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms

2.6.22.5-49.fc6
Device is a HP rx3115

What does it say after a "modprobe ipaq"?

\David
--