Network Problem

Discussion:

Network Problem

Achim Zirner

2008-03-30 16:13:13 UTC

Hi all,

I'm currently trying to restore my sycing-system after I shot it due to
an update...

I am encountring the following popup on my pda after beeing connected
for a while:
"Vom Server zugewiesene IP-Adresse kann nicht abgerufen werden.
Versuchen Sie es später erneut, oder geben Sie in den
Netzwerkeinstellung eine IP-Adresse ein"

For those not fluent in German:
"The IP provided by the server cannot be reached. Try again later or set
an IP-Address in the Network settings"

The label of the popup is "Windows CE-Network"

I m not aware that I changed anything with the network setting since I
had it running, but I might be wrong.

I thought that this might be a RAPI-Issue. I upgraded to all the current
SVN Versions. I build the packages for python-rapi2, python-rra,
python-rtfcomp myself, due to depencies issues with Python < 2.6. (Mark,
any chance of getting rid of this, might be help full for other
Ubuntu-Users.)

Any help is appreciated!

Cheers,

achim

Mark Ellis

2008-03-30 16:24:05 UTC

Permalink

Post by Achim Zirner
Hi all,
I'm currently trying to restore my sycing-system after I shot it due to
an update...
I am encountring the following popup on my pda after beeing connected
"Vom Server zugewiesene IP-Adresse kann nicht abgerufen werden.
Versuchen Sie es später erneut, oder geben Sie in den
Netzwerkeinstellung eine IP-Adresse ein"
"The IP provided by the server cannot be reached. Try again later or set
an IP-Address in the Network settings"
The label of the popup is "Windows CE-Network"

Do you mean you have a successful connection (pls works), which then
gets dropped ?

Post by Achim Zirner
I m not aware that I changed anything with the network setting since I
had it running, but I might be wrong.

Do you have networkmanager running ? Does something cause it to change
the network setup ?

Post by Achim Zirner
I thought that this might be a RAPI-Issue. I upgraded to all the current
SVN Versions. I build the packages for python-rapi2, python-rra,
python-rtfcomp myself, due to depencies issues with Python < 2.6. (Mark,
any chance of getting rid of this, might be help full for other
Ubuntu-Users.)

Nothing I can do, its the way python packages are built. You can rebuild
the packages on your system andthey will use the locally available
version.

Mark

Post by Achim Zirner
Any help is appreciated!
Cheers,
achim
-------------------------------------------------------------------------
Check out the new SourceForge.net Marketplace.
It's the best place to buy or sell services for
just about anything Open Source.
http://ad.doubleclick.net/clk;164216239;13503038;w?http://sf.net/marketplace
_______________________________________________
SynCE-Devel mailing list
https://lists.sourceforge.net/lists/listinfo/synce-devel

Achim Zirner

2008-03-30 18:43:06 UTC

Permalink

Hi,

just finshed setting up a clean partnership on setting up clean
opensync-config.

Also decided to use a virgin calandr to avoid strange past events which
were probably causing problems in the past.

The result:

At first got this output from sync-engine:
---------------------------------------
Exception happened during processing of request from ('169.254.2.1',
3815)
Traceback (most recent call last):
File "SocketServer.py", line 222, in handle_request
self.process_request(request, client_address)
File "SocketServer.py", line 241, in process_request
self.finish_request(request, client_address)
File "SocketServer.py", line 254, in finish_request
self.RequestHandlerClass(request, client_address, self)
File "/usr/lib/python2.5/site-packages/SyncEngine/airsync.py", line
63, in __init__
BaseHTTPServer.BaseHTTPRequestHandler.__init__(self, request,
client_address, server)
File "SocketServer.py", line 522, in __init__
self.handle()
File "BaseHTTPServer.py", line 316, in handle
self.handle_one_request()
File "BaseHTTPServer.py", line 310, in handle_one_request
method()
File "/usr/lib/python2.5/site-packages/SyncEngine/airsync.py", line
166, in do_POST
self._handle_sync()
File "/usr/lib/python2.5/site-packages/SyncEngine/airsync.py", line
309, in _handle_sync
self._send_wbxml_response(rsp_doc)
File "/usr/lib/python2.5/site-packages/SyncEngine/airsync.py", line
99, in _send_wbxml_response
wbxmldata = wbxml.XMLToWBXML(xml)
File
"/usr/lib/python2.5/site-packages/SyncEngine/wbxml/converters.py", line
196, in XMLToWBXML
_processNode(root,encoder)
File
"/usr/lib/python2.5/site-packages/SyncEngine/wbxml/converters.py", line
54, in _processNode

After syncing a couple of times, it worked ;-)
Only had a handfull of events going from evolution to the pda. But that
looks fine. Strangely, some of the contacts don't get transfered. If I
edit the contact in evolution (even if nothing is changed: insert a
charckter, delete the chrarckter) and save it, the contact gets
transfered.
Any Ideas?

At the moment, it seems that the IP-adress-issue is gone.

Keep you updated!

achim

Post by Mark Ellis

Do you mean you have a successful connection (pls works), which then
gets dropped ?

forgot to check this. Will do if it happens again.

Post by Mark Ellis

Post by Achim Zirner
I m not aware that I changed anything with the network setting since I
had it running, but I might be wrong.

Do you have networkmanager running ? Does something cause it to change
the network setup ?

got the network mananger running, but I'm not changing anything.

Post by Mark Ellis

Nothing I can do, its the way python packages are built. You can rebuild
the packages on your system andthey will use the locally available
version.

Too bad, I think I'll take your advice from a couple of days ago an put
them in the wiki.

Post by Mark Ellis
Mark

-------------------------------------------------------------------------
Check out the new SourceForge.net Marketplace.
It's the best place to buy or sell services for
just about anything Open Source.
http://ad.doubleclick.net/clk;164216239;13503038;w?http://sf.net/marketplace
_______________________________________________
SynCE-Devel mailing list
https://lists.sourceforge.net/lists/listinfo/synce-devel

Achim Zirner

2008-03-30 18:51:52 UTC

Permalink

Me again,

I was too fast. The IP-porblems still pops up, but pls still works. Also
the pda stills says it's connected.

strange...

achim

Post by Achim Zirner
Hi,
just finshed setting up a clean partnership on setting up clean
opensync-config.
Also decided to use a virgin calandr to avoid strange past events which
were probably causing problems in the past.
---------------------------------------
Exception happened during processing of request from ('169.254.2.1',
3815)
File "SocketServer.py", line 222, in handle_request
self.process_request(request, client_address)
File "SocketServer.py", line 241, in process_request
self.finish_request(request, client_address)
File "SocketServer.py", line 254, in finish_request
self.RequestHandlerClass(request, client_address, self)
File "/usr/lib/python2.5/site-packages/SyncEngine/airsync.py", line
63, in __init__
BaseHTTPServer.BaseHTTPRequestHandler.__init__(self, request,
client_address, server)
File "SocketServer.py", line 522, in __init__
self.handle()
File "BaseHTTPServer.py", line 316, in handle
self.handle_one_request()
File "BaseHTTPServer.py", line 310, in handle_one_request
method()
File "/usr/lib/python2.5/site-packages/SyncEngine/airsync.py", line
166, in do_POST
self._handle_sync()
File "/usr/lib/python2.5/site-packages/SyncEngine/airsync.py", line
309, in _handle_sync
self._send_wbxml_response(rsp_doc)
File "/usr/lib/python2.5/site-packages/SyncEngine/airsync.py", line
99, in _send_wbxml_response
wbxmldata = wbxml.XMLToWBXML(xml)
File
"/usr/lib/python2.5/site-packages/SyncEngine/wbxml/converters.py", line
196, in XMLToWBXML
_processNode(root,encoder)
File
"/usr/lib/python2.5/site-packages/SyncEngine/wbxml/converters.py", line
54, in _processNode
After syncing a couple of times, it worked ;-)
Only had a handfull of events going from evolution to the pda. But that
looks fine. Strangely, some of the contacts don't get transfered. If I
edit the contact in evolution (even if nothing is changed: insert a
charckter, delete the chrarckter) and save it, the contact gets
transfered.
Any Ideas?
At the moment, it seems that the IP-adress-issue is gone.
Keep you updated!
achim

Post by Mark Ellis

Do you mean you have a successful connection (pls works), which then
gets dropped ?

forgot to check this. Will do if it happens again.

Post by Mark Ellis

Post by Achim Zirner
I m not aware that I changed anything with the network setting since I
had it running, but I might be wrong.

Do you have networkmanager running ? Does something cause it to change
the network setup ?

got the network mananger running, but I'm not changing anything.

Post by Mark Ellis

Nothing I can do, its the way python packages are built. You can rebuild
the packages on your system andthey will use the locally available
version.

Too bad, I think I'll take your advice from a couple of days ago an put
them in the wiki.

Post by Mark Ellis
Mark

Dr J A Gow

2008-03-30 18:57:17 UTC

Permalink

I need the rest of the sync-engine log to debug this - this looks like a
problem in the wbxml conversion but the exception itself is of little
use without being able to see the data that caused it. Can you attempt
to recreate this exception and this time save (and send me) the full
sync-engine log?

John.