Alan Rowe
2007-02-11 17:06:03 UTC
Hello there,
I'm following the How To at http://synce.sourceforge.net/synce/howto.php
and I've got to the point where I'm checking for the kernel module.
If I run a cat /proc/bus/usb/devices, I get the following result:
T: Bus=02 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 2 Spd=12 MxCh= 0
D: Ver= 2.00 Cls=ef(unk. ) Sub=01 Prot=01 MxPS= 8 #Cfgs= 1
P: Vendor=03f0 ProdID=1c1d Rev= 0.00
S: Manufacturer=HP
S: Product=Generic RNDIS
C:* #Ifs= 2 Cfg#= 1 Atr=c0 MxPwr= 2mA
I: If#= 0 Alt= 0 #EPs= 1 Cls=ef(unk. ) Sub=01 Prot=01 Driver=(none)
E: Ad=81(I) Atr=03(Int.) MxPS= 64 Ivl=1ms
I: If#= 1 Alt= 0 #EPs= 2 Cls=0a(data ) Sub=00 Prot=00 Driver=(none)
E: Ad=82(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms
E: Ad=04(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms
I'm following the How To at http://synce.sourceforge.net/synce/howto.php
and I've got to the point where I'm checking for the kernel module.
If I run a cat /proc/bus/usb/devices, I get the following result:
T: Bus=02 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 2 Spd=12 MxCh= 0
D: Ver= 2.00 Cls=ef(unk. ) Sub=01 Prot=01 MxPS= 8 #Cfgs= 1
P: Vendor=03f0 ProdID=1c1d Rev= 0.00
S: Manufacturer=HP
S: Product=Generic RNDIS
C:* #Ifs= 2 Cfg#= 1 Atr=c0 MxPwr= 2mA
I: If#= 0 Alt= 0 #EPs= 1 Cls=ef(unk. ) Sub=01 Prot=01 Driver=(none)
E: Ad=81(I) Atr=03(Int.) MxPS= 64 Ivl=1ms
I: If#= 1 Alt= 0 #EPs= 2 Cls=0a(data ) Sub=00 Prot=00 Driver=(none)
E: Ad=82(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms
E: Ad=04(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms